![\"\"](\"http:\/\/upvcsupplier.com\/wp-content\/uploads\/2024\/03\/2.jpg\")
<\/p>\nAs a high quality roofing material, resin tile is widely used in the construction field for its tightness and excellent waterproof resistance. Synthetic resin tile has good waterproof characteristics, no water absorption, no water seepage, in the laying of waterproof layer, can meet the three levels of roof waterproof requirements. For some buildings with higher requirements, such as villa slope roof, school slope roof, etc., a waterproof layer can be added under the resin tile to improve the waterproof level.<\/p>\n
\u00a0<\/p>\n
So, in the resin tile slope roof, how should we do the waterproof?<\/p>\n
Generally speaking, the common practice of resin tile slope roof secondary waterproof is: structural roof cement mortar leveling layer waterproof layer insulation layer leveling layer or protective layer hanging tile. If the requirement is a higher waterproof level, you can add a waterproof mortar layer above the cement mortar leveling layer, and add a waterproof layer between the insulation layer and the leveling layer or between the leveling layer and the hanging tile. At the same time, 35mm thick fine stone concrete can be used in the leveling layer and equipped with two-way steel bar to improve the waterproof performance of the whole roof.<\/p>\n
![\"\"](\"http:\/\/upvcsupplier.com\/wp-content\/uploads\/2024\/09\/\u5916\u8d38\u5b98\u7f511100.jpg\")
<\/p>\n
In the use of wood as the base to find peacetime, should lay a layer of coil on the base of the board, and the coil on the wood base, the lap width should be 10cm, the spacing of the strip should be 500mm. For the waterproof layer of gutter and eaves ditch, it is recommended to use 1.2mm thick synthetic polymer waterproof coil or 3mm thick high polymer modified asphalt waterproof coil.<\/p>\n
<\/p>\n
After completing the laying of the waterproof layer, and then cover the insulation layer and resin tile, so as to complete the waterproof, insulation and tile plate cover work of the whole roof.<\/p>\n
<\/p>\n
In addition, there are several key points to pay special attention. First of all, choose the waterproof materials that meet the requirements to ensure that its quality and performance meet the standards. Secondly, the construction technology should be fine, the base treatment, joint treatment and the treatment of the fine structure need to be carefully completed. Finally, after the completion of the construction, the water storage test, to check whether there is a water seepage problem.<\/p>\n
![\"\"](\"http:\/\/upvcsupplier.com\/wp-content\/uploads\/2024\/09\/\u5916\u8d38\u5b98\u7f511102.jpg\")
<\/p>\n
The waterproof engineering of the resin tile slope roof is of great significance to protect the integrity and service life of the building structure. Through scientific construction methods and the selection of high-quality waterproof materials, we can ensure that the resin tile slope roof has excellent waterproof performance in a variety of environmental conditions, to provide reliable protection for the building.<\/p>","protected":false},"excerpt":{"rendered":"
As a high quality roofing material, resin tile is widely used in the construction field for its tightness and excellent<\/p>","protected":false},"author":2,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[68,526],"class_list":["post-5018","post","type-post","status-publish","format-standard","hentry","category-news","tag-resin-tile","tag-waterproof-resistance"],"yoast_head":"\n